[Wuzhong Zhongchuang Automatic Control Valve] Sharing: Functions and Characteristics of Globe Valves

We often install globe valves at the outlet of centrifugal pumps. The purpose is to prevent water hammer phenomenon from damaging the centrifugal pump after it is turned off, and also to prevent backflow from causing the pump to reverse after the pump stops running. Usually, we use globe valves to cut off the transport of media in pipelines. Compared to gate valves, globe valves have better regulation performance, small opening height, faster closing speed, convenient manufacturing and maintenance, sealing surfaces not prone to wear, and better sealing performance. Next, we will analyze the functions and advantages of globe valves for you

Functions of Globe Valves

A globe valve is a valve where the closing member moves along the center line. Based on the movement form of the valve disc, the change in the valve seat passage is directly proportional to the valve disc. Since the opening or closing stroke of the valve stem of this type of valve is short, it inherently possesses a relatively reliable shut-off function. Also, because the change in the valve seat passage is directly proportional to the stroke of the valve disc, it is very suitable for flow regulation. Therefore, this type of valve is very suitable for cutting off, regulating, and throttling. Similarly, pneumatic ball valves are also applicable

 

Characteristics of Globe Valves:

During opening and closing, because the friction between the valve disc and the valve body sealing surface is smaller than that of gate valves, it is more wear-resistant

The opening height of a globe valve generally defaults to one-quarter of the valve seat channel diameter, thus its opening height is smaller

Usually, there is only one sealing surface on the valve body and valve disc, so its manufacturing process is better, and maintenance is more convenient

How to Select Globe Valves:

1. Globe valves are suitable for pipelines or devices with high-temperature and high-pressure media

2. On pipelines where strict requirements for flow resistance are not required, that is, positions where pressure loss is not significant

3. Small valves can be selected as needle valves, instrument valves, sampling valves, pressure gauge valves, etc.

4. Where there is flow regulation or pressure regulation, but the requirement for precision is not high, and the pipeline diameter is relatively small

5. In desilication workshops of alumina Bayer process production plants, or on pipelines prone to coking, it is suitable to select straight-through globe valves or straight-through throttle valves with split valve bodies, removable valve seats, and hard alloy sealing pairs