Industry News

  • [Wuzhong Zhongchuang Automatic Control Valve] Sharing: Which Valves Are Dedicated to the Coal Chemical Industry?

    [Wuzhong Zhongchuang Automatic Control Valve] Sharing: Which Valves Are Dedicated to the Coal Chemical Industry?

    Apart from some general-purpose valves that can be used in certain coal chemical working conditions, which valves are dedicated valves for the coal chemical industry? Metal hard-seal wear-resistant ball valves, including: lock hopper valves, lock slag valves, lock ash valves, vent valves, balance valves. Black water control valves, gray water control valves, high-pressure differential control valves. Disc valves, including: lock hopper valves, lock slag valves, lock ash valves, vent valves, balance valves. Balance valves, high-temperature slag discharge valves. Pulverized coal control valves,

  • [Wuzhong Zhongchuang Control Valve] Sharing: Globe Valve Models

    [Wuzhong Zhongchuang Control Valve] Sharing: Globe Valve Models

    I. Applications of Globe Valves: 1. Used for cutting off media in pipelines. 2. Can be used to regulate flow and medium ratio (liquid level), but not for throttling; generally used as an on-off device on pipelines. 3. Suitable for use as shut-off and connection valves in low to medium pressure pipeline network systems or installations. 4. Can be installed on horizontal pipelines or in vertical pipelines. 5. Sealing surfaces can be made with smooth surfaces or recessed concave-convex structures to meet the requirements of different working conditions.

  • [Wuzhong Zhongchuang Self-Control Valve] Sharing: Does Globe Valve Installation Have Directional Requirements?

    [Wuzhong Zhongchuang Self-Control Valve] Sharing: Does Globe Valve Installation Have Directional Requirements?

    [Wuzhong Zhongchuang Self-Control Valve] Globe valves are relatively common valves in daily life, and can often be seen on plumbing and heating pipes in our home environments. Although common, many people don't know much about them. When installing them on their own, some problems may occur, resulting in issues after a short period of use, requiring replacement, and even complaining about poor valve quality, leading to many misunderstandings, which is truly unfortunate.

  • [Wuzhong Zhongchuang Control Valve] Sharing: Learning Control Valves, Valve Doctor Helps You Highlight the Key Points!

    [Wuzhong Zhongchuang Control Valve] Sharing: Learning Control Valves, Valve Doctor Helps You Highlight the Key Points!

    [Wuzhong Zhongchuang Control Valve] Control Valve = Actuator + Valve Body Components + Accessories Among them, the actuator is the driving device of the control valve, which generates corresponding thrust according to the signal pressure, causes the push rod to produce corresponding displacement, thereby driving the valve core of the control valve to operate; the valve body component is the regulating part of the control valve, which directly contacts with the medium, and changes the throttling area of the control valve through the displacement of the actuator push rod to achieve the purpose of regulation.

  • [Wuzhong Zhongchuang Automatic Control Valve] Sharing: Functions and Characteristics of Globe Valves

    [Wuzhong Zhongchuang Automatic Control Valve] Sharing: Functions and Characteristics of Globe Valves

    We often install globe valves at the outlet of centrifugal pumps. The purpose is to prevent water hammer phenomenon from damaging the centrifugal pump after it is turned off, and also to prevent backflow from causing the pump to reverse after the pump stops running. Usually, we use globe valves to cut off the transport of media in pipelines. Compared to gate valves, globe valves have better regulation performance, small opening height, faster closing speed, convenient manufacturing and maintenance, sealing surfaces not prone to wear, and better sealing performance. Next, we

  • [Wuzhong Zhongchuang Automatic Control Valve] Sharing: Electric High-Pressure Globe Valve

    [Wuzhong Zhongchuang Automatic Control Valve] Sharing: Electric High-Pressure Globe Valve

    The electric high-pressure globe valve is a high-pressure stop valve with a simple structure, small volume, light weight, convenient operation, and low fluid resistance. The closing part (gate) of the electric high-pressure globe valve is made of stainless steel and carbon steel. Seals can be made of polytetrafluoroethylene (PTFE), cemented carbide, or other materials, and different materials can be selected according to working pressure and medium temperature. The electric high-pressure globe valve has the following characteristics: 1. Simple structure; 2. Reasonable design; 3. Good sealing p

  • 【Wuzhong Zhongchuang Automatic Control Valve】Sharing: Functions and Characteristics of Globe Valves

    【Wuzhong Zhongchuang Automatic Control Valve】Sharing: Functions and Characteristics of Globe Valves

    We often install globe valves at the outlet of centrifugal pumps to prevent damage to the centrifugal pump caused by water hammer phenomena after shutting down the pump, and also to prevent backflow causing the pump to reverse after it stops running. Usually, we use globe valves to cut off the transport of medium in pipelines. Compared to gate valves, globe valves have better regulation performance, a smaller opening height, faster closing, convenient manufacturing and maintenance, sealing surfaces that are not prone to wear, and better sealing performance. Next, we

  • [Wuzhong Zhongchuang Automatic Control Valve Co., Ltd.] Sharing: A Brief Introduction to Valves

    [Wuzhong Zhongchuang Automatic Control Valve Co., Ltd.] Sharing: A Brief Introduction to Valves

    [Wuzhong Zhongchuang Automatic Control Valve Co., Ltd.] Valve types: gate valves, globe valves, butterfly valves, ball valves, plug valves, check valves, pressure reducing valves, steam traps, etc. Gate valve: also known as a sluice valve, is a widely used valve. The closing principle relies on the high finish and flat uniformity of the gate sealing surface and the valve seat sealing surface, which fit tightly against each other to prevent the medium from flowing through, and relies on the top wedge, spring, or the wedge shape of the gate to enhance the sealing effect. Butterfly valve: also kn

  • [Wuzhong Zhongchuang Automatic Control Valve] Sharing: What are the characteristics of solenoid valves? In what areas can they be applied?

    [Wuzhong Zhongchuang Automatic Control Valve] Sharing: What are the characteristics of solenoid valves? In what areas can they be applied?

    [Wuzhong Zhongchuang Automatic Control Valve] Solenoid valves are not unfamiliar to everyone, but most people only know of them without fully understanding them. There are many types of solenoid valves, but they are broadly similar: they are all switches that use an electric current passing through a coil to act on the valve core to control the on/off flow of gas or liquid. Next, let's learn about the related knowledge of solenoid valves together.

  • [Wuzhong Zhongchuang Control Valve] Sharing: Daily Insights on Control Valves

    [Wuzhong Zhongchuang Control Valve] Sharing: Daily Insights on Control Valves

    Key Points for Daily Maintenance of Control Valves in Operation - Have You Paid Attention to These Details? In industrial production and control processes, control valves serve as the core executive units and are hailed as the 'hands and feet of industrial automation production lines'. Their stability is directly related to the smooth operation of the entire process system. Today, [Wuzhong Zhongchuang Control Valve] shares insights on the maintenance and upkeep of control valves in daily production.

  • [Wuzhong Zhongchuang Control Valve] Sharing: Dynamic Diagrams and Classification of Commonly Used Control Valves

    [Wuzhong Zhongchuang Control Valve] Sharing: Dynamic Diagrams and Classification of Commonly Used Control Valves

    [Wuzhong Zhongchuang Control Valve] Pneumatic diaphragm control valves mainly consist of straight stroke and angle stroke types. 1. Straight Stroke Control Valves: ⑴ Straight-Through Single-Seat Pneumatic Diaphragm Control Valve The pneumatic diaphragm single-seat control valve is a commonly used actuator in automatic control systems. It consists of a pneumatic diaphragm actuator and a straight-through single-seat valve, featuring a single-seat plunger-type valve core. The valve core adopts top and bottom guidance, with simple structure and reliable operation.

  • [Wuzhong Zhongchuang Automatic Control Valve] Sharing: Ball Valves, Key Components for Industrial Fluid Control

    [Wuzhong Zhongchuang Automatic Control Valve] Sharing: Ball Valves, Key Components for Industrial Fluid Control

    Ball valves are common industrial fluid control devices. Due to their simple and efficient design, they have become indispensable components across various industries. Ball valves feature rapid opening and closing, excellent sealing performance, and reliable operation, making them play a crucial role in fluid piping systems. Today, we will introduce the working principle, structure, and application fields of ball valves. Principle and Structure: The function of a ball valve is to regulate fluid flow by controlling a spherical valve.