[Wuzhong Zhongchuang Control Valve] Sharing: Globe Valve Models
I. Applications of Globe Valves:
1. Used to cut off media in pipelines.
2. Can be used to regulate flow rate and medium ratio (liquid level), but cannot be used for throttling; generally used as an opening and closing device on pipelines.
3. Suitable for cutting off and connecting valves in low and medium pressure piping network systems or installations.
4. Can be installed on horizontal pipelines or in vertical pipelines.
5. Sealing surfaces can be made with smooth surfaces or recessed concave-convex structures to adapt to requirements of different working conditions.
6. Various accessories, such as safety relief valves, can be equipped according to different needs.
II: Structural Principle of Globe Valves:
A globe valve is an automatically controlled valve used to open and close the flow direction of fluid in a pipeline system, also known as a check valve.
Its closing process is completed by the following four actions:
1. Reducing the pressure of liquid flowing into the system;
2. Increasing the velocity of gas flowing through the component;
3. Preventing gas from returning;
4. Preventing backflow phenomenon. Since this type of valve has nearly the entire flow area in a fully closed state when open, the pressure drop through such valves is relatively small.
III. Types of Globe Valves:
According to connection methods, they can be divided into two types: threaded flange type and welded type. The latter is often made of high-pressure cast copper alloy material, characterized by light weight and small size.
IV. Characteristics of Globe Valves:
(1) Good sealing performance:
Elastic materials are used to make soft contact with non-metallic hard objects, causing deformation to absorb energy and achieve sealing effect. When the end is closed, an open channel is formed to prevent outside air from entering the interior.
(2) Fluid resistance loss:
Due to the long neck design, the friction coefficient is generated when the inlet and outlet diameters are the same.
(3) Simple and reliable structure:
Advantages include fewer parts, easy maintenance, low repair costs, and long service life.
5. Precautions for the use of globe valves:
1. Sufficient space should be reserved for easy disassembly, repair, and replacement of packing gaskets.
2. Keep it clean regularly to prevent impurities from hindering the wear of sealing surfaces.
3. It is strictly prohibited to disassemble with damaged mechanical tools. Regularly check whether the bolts are loose, and tighten them promptly if damaged.
4. For long-term storage, oil should be applied once even to areas that do not require lubrication.
6. Products with transmission mechanisms should be filled with lubricating oil once before each shift, and attention should be paid to whether there is dirt accumulation in the gearbox.
7. During electric operation, the power cord should be properly connected before the switch can be started.
8. For manual operation, rotate the gate handwheel clockwise to the fully open position to remove the nut; conversely, rotate the nut counterclockwise to remove the handle to prevent jamming; overload use is strictly prohibited, and random collision and striking are forbidden.

