【Wuzhong Zhongchuang Automatic Control Valve】Sharing: Functions and Characteristics of Globe Valves
We often install globe valves at the outlet of centrifugal pumps to prevent damage to the centrifugal pump caused by water hammer phenomena after shutting down the pump, and also to prevent backflow causing the pump to reverse after it stops running. Usually, we use globe valves to cut off the transport of medium in pipelines. Compared to gate valves, globe valves have better regulation performance, a smaller opening height, faster closing, convenient manufacturing and maintenance, sealing surfaces that are not prone to wear, and better sealing performance. Next, we will analyze the functions and advantages of globe valves for you
Functions of Globe Valves
A globe valve is a valve where the closing member moves along the centerline. Based on the movement form of the valve disc, the change in the valve seat port is directly proportional to the valve disc. Because the opening or closing stroke of the valve stem of this type of valve is short, it possesses a relatively reliable cut-off function. Also, since the change in the valve seat port is proportional to the stroke of the valve disc, it is very suitable for regulating flow. Therefore, this type of valve is very suitable for use in cutting off, regulating, or throttling. Similarly, pneumatic ball valves are also applicable
Characteristics of Globe Valves:
During opening and closing, because the friction between the valve disc and the valve body sealing surface is smaller than that of gate valves, it is more wear-resistant
The opening height of a globe valve generally defaults to one-quarter of the valve seat channel diameter, therefore its opening height is smaller
Usually, there is only one sealing surface on the valve body and the valve disc, so its manufacturing process is better, and maintenance is more convenient
How to Select Globe Valves:
1. Globe valves are suitable for pipelines or devices with high-temperature and high-pressure media
2. Pipelines where the requirement for flow resistance is not strict, that is, locations where pressure loss is not significant
3. Small valves can be needle valves, instrument valves, sampling valves, pressure gauge valves, etc.
4. Where there is flow regulation or pressure regulation, but the requirement for precision is not high, and the pipeline diameter is relatively small
5. In the desilication workshop of the alumina Bayer process production workshop, and on pipelines prone to coking, it is suitable to select straight-through globe valves or straight-through throttle valves with split valve bodies, removable valve seats, and hard alloy sealing pairs

