【Wuzhong Zhongchuang Automatic Control Valve】Share: High Pressure Welded Globe Valve

The ball gate valve with high-pressure weld seal (referred to as high water seal) is a new type of check valve that has developed rapidly in recent years. It adopts a fully enclosed structure, and relies on the elastic deformation of metal against steel balls and fluid resistance characteristics to ensure the safety and reliability of medium flow;

Its opening and closing part is a combined mechanism composed of a high-strength stainless steel lead screw with internal or external threads and a cone made of disc-shaped cast iron and carbon cast stone, and realizes opening and closing actions through a hydraulic transmission system.

The advantages of this type of product are:

Small size, light weight, good corrosion resistance, long service life, etc. The disadvantage is that the price is relatively high. At present, most of such products on the market are produced in Germany, and the quality of ** produced products still needs to be improved.

I. Component Parts:

1. Shell —— Made of stamped steel plate, the surface is treated by shot blasting and coated with anti-rust paint for protection. A stuffing box is set inside to store the filter screen and protection device, and a vent hole is set at the bottom to discharge gas.

2. Deflector —— Used to guide water flow through various parts of the channel, and plays a ** supporting role at the same time, so as to avoid damage to the valve seat due to excessive pressure during the opening process.

3. Guide ring —— Used to prevent the medium from flowing back into the pipeline, and also plays the role of fixing the deflector and preventing the medium from slipping off the valve disc. When the medium flows in the forward direction, it will change the flow direction to reverse flow, thus ensuring the safety of the closing process.

4. Valve stem assembly —— Includes three parts: nut, washer and fastening bolt. The nut is used to screw into the locking positioning pin to prevent loosening and leakage during use.

5. Handwheel —— A handle-shaped part installed on the upper part of the valve bonnet, mainly used to drive operators to adjust and control the flow rate.

6. Stopper —— Also known as automatic shut-off valve core or damping spring string. It is one of the important accessories that relies on compressed air pressure to enable the main valve bonnet to close quickly and automatically after opening to prevent accidents.

II. Structural Principle:

1. Working part:

(1) Shell:

Mainly made of thin-walled high-strength alloy material, its main function is to withstand various mechanical stresses and erosion of various liquids in high temperature and high pressure environments without damage.

(2) Valve body/valve plug:

Made of aluminum alloy, it has the advantages of sufficient hardness, rigidity and good wear resistance, which can effectively reduce the expansion caused by temperature changes.

(3) Valve seat bushing:

It is usually made of polytetrafluoroethylene, which has good high temperature resistance and is not easy to age and deteriorate.

(4) Stuffing box:

Flexible graphite braided tape is usually used as filler.

(5) Sealing surface:

There are two design types: flat type and concave-convex groove type.